Write a Detailed Contractor Quote for a Home Repair or Renovation Job

Get a complete, itemized contractor quote with separate labor and materials tables, exclusions, a milestone payment schedule and a valid-until date.

You getHeader, scope of work and labor table

Prompt

Prompt
You are an experienced residential contractor and estimator who writes itemized quotes homeowners can compare line by line.

Write a detailed quote for a home repair or renovation job. First ask me these questions in one message, then wait:
1. What is the job and scope (rooms, sizes, finish level)?
2. What is your labor rate, and what are the estimated hours or crew days?
3. What materials are needed, what are your costs and markup, and are there any allowances?
4. What are your deposit terms, and how long should the quote stay valid?

Rules:
- Show labor and materials separately. Every line has quantity, unit price and total.
- List at least 5 specific exclusions (e.g., hidden rot, permits, debris haul-away).
- Tie each payment to a visible milestone, not a date.
- Use only my numbers. Mark any line you had to estimate with "(est.)".
- Use plain language with no legal jargon.

Output format:
1. Header: customer, job, quote number, date, valid-until date
2. Scope of work (numbered steps)
3. Labor table: Task | Hours | Rate | Total
4. Materials table: Item | Qty | Unit cost | Total
5. Subtotal, tax, grand total
6. Exclusions and allowances
7. Payment schedule: Milestone | % | Amount
8. Change orders, warranty, signature lines

End with one line on assumptions and missing information. This is not legal advice. Check deposit limits and contract terms with your licensing board or a local attorney.

Example output

Example for: a small remodeling company quoting a 5x8 ft hall bathroom refresh, $65/hr labor, 30-day validity.

Quote #HL-2417 — Harbor Line Renovations

Customer: Dana Whitfield | Job: Hall bathroom refresh (5x8 ft) | Date: March 4 | Valid until: April 3

Scope of Work
  1. Remove the existing vanity, toilet, floor tile and tub-surround tile.
  2. Install cement board and waterproofing membrane on the tub walls.
  3. Have a licensed plumber adjust the vanity supply and drain lines.
  4. Tile the floor and tub surround, then grout and seal.
  5. Install the new vanity and toilet.
  6. Paint the walls and trim, then do a final clean.
Labor
TaskHoursRateTotal
Demolition12$65$780
Plumbing adjustments (licensed sub)8$95$760
Tile floor and surround32$65$2,080
Vanity and toilet install6$65$390
Paint and trim6$65$390
Labor total$4,400
Materials
ItemQtyUnit costTotal
Cement board and waterproofing1 lot$410$410
Floor tile60 sq ft$6.50$390
Wall tile90 sq ft$5.00$450
Vanity (allowance)1$900$900
Toilet1$310$310
Thinset, grout, paint (est.)1 lot$220$220
Materials total$2,680
Totals
  • Subtotal: $7,080.00
  • Sales tax (7% on materials): $187.60
  • Grand total: $7,267.60
Exclusions and Allowances
  • Repair of hidden rot, mold or subfloor damage found after demolition
  • Permit fees (billed at cost if required)
  • Replacing the tub or its valve
  • Electrical work beyond swapping the existing light fixture
  • Dumpster rental over 10 cubic yards
  • Vanity allowance: $900. If your choice costs more, you pay the difference. If it costs less, we credit the difference.
Payment Schedule
Milestone%Amount
Signed quote, materials ordered30%$2,180.28
Tile set and grouted40%$2,907.04
Final walkthrough approved30%$2,180.28
Change Orders, Warranty, Acceptance
  • Change orders: Any change is written and signed before work starts. Extra labor is billed at $65/hr, and materials at cost plus 15%.
  • Warranty: 1 year on workmanship. Manufacturer warranties apply to fixtures.
  • Signatures: Customer: __________ Date: __ | Contractor: ________ Date: ____

Assumptions: the subfloor is sound and the existing shutoff valves work. The thinset, grout and paint cost is estimated until tile is selected.

Written by AI from this prompt. Your results will vary.

Tips and common edits

Why this works

  • Asking for rate, hours, materials and terms first means every number in the quote comes from the contractor, not from guesses.
  • Requiring at least 5 named exclusions and a change-order rule heads off the most common payment disputes.
  • Tying payments to visible milestones and setting a valid-until date protects both sides from price drift and stalled jobs.

Use it before sending a bid on any repair or remodel job. Have your labor rate, hour estimates, material costs and deposit terms ready. Works in ChatGPT, Claude or Gemini.

Common edits

  • Add a Good/Better/Best option table so customers can pick a finish level.
  • Ask for a short cover email to send along with the quote.

Prompt details

By
Prompts-GPT editors
Published

Did this prompt work?

Keep exploring

More in Career & Job Search